# PrepperPatriot.com #Preparedness #Survivalist Wiki-Blog for #MAGA #AmericaFirst Patriots

### Site Tools

ampere
Snippet from Wikipedia: Ampere

The ampere ( or (UK), symbol: A), often shortened to "amp", is the base unit of electric current in the International System of Units (SI). It is named after André-Marie Ampère (1775–1836), French mathematician and physicist, considered the father of electrodynamics.

The International System of Units defines the ampere in terms of other base units by measuring the electromagnetic force between electrical conductors carrying electric current. The earlier CGS measurement system had two different definitions of current, one essentially the same as the SI's and the other using electric charge as the base unit, with the unit of charge defined by measuring the force between two charged metal plates. The ampere was then defined as one coulomb of charge per second. In SI, the unit of charge, the coulomb, is defined as the charge carried by one ampere during one second.

New definitions, in terms of invariant constants of nature, specifically the elementary charge, took effect on 20 May 2019.

The ampere (SI unit symbol:

; SI dimension symbol:

), often shortened to amp,<ref name=BIPM2006>SI supports only the use of symbols and deprecates the use of abbreviations for units.

</ref> is the SI unit of electric current<ref name=“BIPMdefinition”>

</ref><ref>Base unit definitions: Ampere. Physics.nist.gov. Retrieved on 2010-09-28.</ref> (quantity symbol:

,

)<ref>

</ref> and is one of the seven<ref>The other six are the metre, kelvin, second, mole, candela, and kilogram</ref> SI base units. It is named after André-Marie Ampère (1775–1836), French mathematician and physicist, considered the father of electrodynamics.

In practical terms, the ampere is a measure of the amount of electric charge passing a point in an electric circuit per unit time, with

electrons (or one coulomb) per second constituting one ampere.<ref>

</ref>

The practical definition may lead to confusion with the definition of the coulomb (i.e., 1 ampere-second) and the ampere-hour (A·h), but in practical terms this means that measures of a constant current (e.g., the nominal flow of charge per second through a simple circuit) will be defined in amperes (e.g., “a 20 mA circuit”) and the flow of charge through a circuit over a period of time will be defined in coulombs (e.g., “a variable-current circuit that flows a total of 10 coulombs over 5 seconds”). In this way, amperes can be viewed as a flow rate, i.e. number of (charged) particles transiting per unit time, and coulombs simply as the number of particles.

## Definition

File:Ampere-def-en.svg

Ampère's force law<ref name=Serway>

</ref><ref name = “Beyond”>

.</ref> states that there is an attractive or repulsive force between two parallel wires carrying an electric current. This force is used in the formal definition of the ampere, which states that it is “the constant current that will produce an attractive force of 2&nbsp;&times;&nbsp;10–7 newton per metre of length between two straight, parallel conductors of infinite length and negligible circular cross section placed one metre apart in a vacuum”.<ref name= “BIPMdefinition” /><ref>

.</ref>

The SI unit of charge, the coulomb, “is the quantity of electricity carried in 1 second by a current of 1 ampere”.<ref>

.</ref> Conversely, a current of one Ampere is one coulomb of charge going past a given point per second: :$\rm 1\ A=1\tfrac C s.$ In general, charge Q is determined by steady current I flowing for a time t as Q = It.

## History

The ampere was originally defined as one tenth of the CGS system electromagnetic unit of current (now known as the abampere), the amount of current that generates a force of two dynes per centimetre of length between two wires one centimetre apart.<ref>

.</ref> The size of the unit was chosen so that the units derived from it in the MKSA system would be conveniently sized.

The “international ampere” was an early realization of the ampere, defined as the current that would deposit

grams of silver per second from a silver nitrate solution.<ref>

</ref> Later, more accurate measurements revealed that this current is 0.99985&nbsp;A.

## Realization

The standard ampere is most accurately realized using a watt balance, but is in practice maintained via Ohm's law from the units of electromotive force and resistance, the volt and the ohm, since the latter two can be tied to physical phenomena that are relatively easy to reproduce, the Josephson junction and the quantum Hall effect, respectively.<ref name = “Electrical quantities”>

.</ref>

At present, techniques to establish the realization of an ampere have a relative uncertainty of approximately a few parts in 107, and involve realizations of the watt, the ohm and the volt.<ref name= “Electrical quantities” />

## Proposed future definition

Rather than a definition in terms of the force between two current-carrying wires, it has been proposed to define the ampere in terms of the rate of flow of elementary charges.<ref name = “Beyond” /> Since a coulomb is approximately equal to

elementary charges (such as electrons), one ampere is approximately equivalent to

elementary charges moving past a boundary in one second, or the reciprocal of the value of the elementary charges in coulombs.<ref>

.</ref> The proposed change would define 1 A as being the current in the direction of flow of a particular number of elementary charges per second. In 2005, the International Committee for Weights and Measures (CIPM) agreed to study the proposed change. The new definition is expected to be formally proposed at the 25th General Conference on Weights and Measures (CGPM) in 2014.<ref>

</ref>

## Everyday examples

The current drawn by typical constant-voltage energy distribution systems is usually dictated by the power (watts) consumed by the system and the operating voltage. For this reason the examples given below are grouped by voltage level.

• Hearing aid (typically 1&nbsp;mW at 1.4&nbsp;V): 0.7&nbsp;mA

### Motor vehicles – 12 V DC

A typical motor vehicle has a 12&nbsp;V battery. The various accessories that are powered by the battery might include:

• Instrument panel light (typically 2&nbsp;W): 166&nbsp;mA.
• Headlights (typically 60&nbsp;W): 5&nbsp;A each.
• Starter Motor (typically 1–2&nbsp;kW): 80-160&nbsp;A

### North American domestic supply – 120 V AC

Most United States, Canada and Mexico domestic power suppliers run at 120&nbsp;V.

Household circuit breakers typically provide a maximum of 15&nbsp;A or 20&nbsp;A of current to a given set of outlets.

• 22-inch/56-centimeter portable television (35&nbsp;W): 290&nbsp;mA
• Tungsten light bulb (60–100&nbsp;W): 500–830&nbsp;mA
• Toaster, kettle (2&nbsp;kW): 16.6&nbsp;A
• Immersion heater (4.6&nbsp;kW): 38.3&nbsp;A

### European & Commonwealth domestic supply – 230-240 V AC

Most European domestic power supplies run at 230&nbsp;V, and most Commonwealth domestic power supplies run at 240&nbsp;V. For the same amount of power (in Watts), the current drawn by a particular European or Commonwealth appliance (in Europe or a Commonwealth country) will be less than for an equivalent North American appliance.<ref group=“Note”>The formula for power is given by :$P(t) = I(t) \cdot V(t) \,$ so it follows that if the voltage is doubled and the power remains the same, the current will be halved.</ref> Typical circuit breakers will provide 16&nbsp;A.

The current drawn by a number of typical appliances are:

• 22-inch/56-centimeter Portable Television (35&nbsp;W): 145–150&nbsp;mA
• Tungsten light bulb (60–100&nbsp;W): 240–450&nbsp;mA
• Compact Fluorescent Lamp (11–30&nbsp;W): 56–112&nbsp;mA
• Toaster, kettle (2&nbsp;kW): 9&nbsp;A
• Immersion heater (4.6&nbsp;kW): 19-20&nbsp;A